GF2015A

SKU : GF2015A

GFU2015A Series Data Sheet : Download / Main Catalogs : Download

GF2015 WIRELESS PRIMARY CURRENT RECORDER METER 

GF2015 is a wireless primary current recorder equipped with a 433M for transmit the recorded data into the user's PC by our PC-Link Software. It is a good assistant of power monitor system. The recording interval can be set from 1- 60 min. The PC-Link Software can generate reports and create graphs for profile analysis. 

FEATURES 

• The Primary current recorder uses the same sensor technology as the original Rogowski Coil. The True RMS inductive sensor does not use magnetic materials. The opening of the sensor is electronically closed and external currents are electronically rejected. 
• The accuracy, external current reject, and range of currents measured by the patented amp sensor substantially exceed the performance of the best clamp-on sensors. The key feature of the unit is the ability to leave it deployed on the line to record readings every 15 minutes for 90+ days. It easily attaches to the line with a standard insulating bar. Once on the line, it immediate begins to collect and record the primary current on the line. 
• The Primary current recorder is equipped with a 433M wireless port for communicating the recorded data into the user’s PC. The data is downloaded through GF2015S PC-Link Software, which allows the user to download, view and query the data stored on the Primary current recorder. 
• The housing of the Primary current recorder is made of ABS+PC and is built to operate safely, even in severe utility environments. It is resistant to shock, repels water and is unsusceptible to flame. It also operates within a wide temperature range. The Primary current recorder has the screw insulation bar of installation, which allows it to hang on the line securely in all weather conditions. 
• PC-Link Software is a user-friendly software interface that allows the user to download, view, graph and export data from the Primary current recorder into Microsoft Excel. The data directly transfers from the Primary current recorder into Excel through a 433M Port. 

AMP RECORDER 

• Collect and analyze load profiles 
• Easily clamps to the line in seconds 
• Check for load balance 
• Patented open CT sensor with ±1% accuracy 
• 433M communication with no annoying cables to connect 
• Recorded data quickly downloads into the user's PC 
• PC-Link Software interface downloads directly into Microsoft Excel 
• Generate reports and create graphs for profile analysis

Basic parameters　 

1. Recording ammeter kit : 3 wireless current sensors (GF2015A, GF2015B, GF2015C) 
2. 433 HHT(handheld terminal) or 433M wireless data reader(GF2015R) / PC-LinkSoftware software(GF2015S) / Carrying case 
3. Data recording interval : 5min, 10min,15min, 30min; 
4. Interval user settable from 1-60min : Communication distance(wireless) / 100m 
5. Communication : 433M, 868M or 915M (option) 
6. Installation : Installation with electricity; Disassemble with electricity 
7. Battery : 3.6 volt lithium battery,19000mAh; Battery can be replaced 
8. Software requirements : PC-Linksoftware & microsoft Excel 
9. Processor : 100 MHz or higher ( 200 MHz or higher recommended) 
10. RAM : 32 MB, 64M recommended 
11. Drive space : 15 MB to load software, 10 MB of operating Space 
12. Use of position : Outdoor or indoor 

Range of operation　 　 

1. Voltage : 69kV,35kV,20KV, 10kV, 6kV  
2. Current : 1 to 100A, 1 to 300A, 1 to 600A, 1 to 1000A, 1 to 2000A 
3. Sensor opening : Up to 2.5 cm 

Resolution　 

1. 1 to 99.9A ,0.1A , 100 to 2000A ,1A ,
2. Amps accuracy  : ±1% of reading plus 2 counts 
3. Frequency : 60Hz (57-63 Hz) or 50Hz (47-53 Hz) models available 

Mechanical parameters　 

1. Dimensions (W×D×H) (cm) 18x9.5x4.62 
2. Weight (kg) :0.58 

Environmental conditions　  

1. Operating temp. : -40°C to 60°C 

MOQ. 1Ea.