Order tracking   

Single Application Testers

 
  • We pride ourselves on offering a wide product range, with specialist solutions for testing all types of fire detectors. Our range of single application testers provide standalone solutions for testing smoke, heat, and CO fire detectors. Entry level products start with our SmokeSabre smoke detector tester, a hand-held smoke detector tester aerosol which is great for occasional use or as a backup to other test equipment.
  • Our Solo range of testers offers solutions for smoke, heat, and CO detector testing. A suite of head-units exists which, when fitted to a Solo access pole, enable testing of detectors at heights up to 9 metres. The Solo A5 and Solo A10 smoke aerosols remain the most widely used solutions worldwide for testing smoke detectors, however the arrival of Solo 365 – a smoke cartridge based tester is rising in popularity as the industry looks for alternatives to smoke aerosols.
 
  • Solo C6 CO Test Aerosol (Hand-held use)
    40.00 USD
    45.00 USD  (-11%)

     

  • Solo C3 CO Test Aerosol (Dispenser use)
    45.00 USD
    50.00 USD  (-10%)

     

  • AERO 400 Trutest Smoke Aerosol
    60.00 USD
    65.00 USD  (-8%)

     

  • Solo A5 Smoke Test Aerosol (Dispenser use)
    60.00 USD
    65.00 USD  (-8%)

     

  • Solo A10s Smoke Test Aerosol (Dispenser use)
    60.00 USD
    65.00 USD  (-8%)

     

  • Solo A10 Smoke Test Aerosol (Dispenser use)
    45.00 USD
    50.00 USD  (-10%)

     

  • Solo 365 Smoke Cartridges x 12
    400.00 USD
    450.00 USD  (-11%)

     

  • Scorp 1001 Point Test Head Unit and Mounting Bracket
    485.00 USD
    550.00 USD  (-12%)

     

  • Solo 423 Heat Detector Tester
    700.00 USD
    800.00 USD  (-13%)

     

  • Solo 424 Heat Detector Tester
    700.00 USD
    800.00 USD  (-13%)

     

  • Solo 461 Cordless Heat Detector Test Kit
    950.00 USD
    1,150.00 USD  (-17%)

     

  • Solo 460 Cordless Heat Detector Tester
    650.00 USD
    750.00 USD  (-13%)

     

  • Trutest 801 Smoke Detector Sensitivity Test Head
    0.00 USD

     

  • Scorp 1011 Smoke Detector Tester (for hard-to-access detectors)
    460.00 USD
    485.00 USD  (-5%)

     

  • Solo 332 Aerosol Smoke/CO Dispenser - Large Cup
    410.00 USD
    425.00 USD  (-4%)

     

  • Solo 330 Aerosol Smoke/CO Dispenser
    300.00 USD
    350.00 USD  (-14%)

     

  • Solo 365 Electronic Smoke Detector Test Kit
    850.00 USD
    950.00 USD  (-11%)

     

  • SmokeSabre Smoke Test Aerosol (Hand-held use)
    40.00 USD
    45.00 USD  (-11%)

    Variants available

Single Application Testers FRQs.

 
  • Single Application Testers FAQs
    How often do heat detectors need to be tested?
    The frequency of testing commercial heat detectors is recommended by national and regional standards, typically expressed as a maximum interval. In environments that are dirty, dusty, or corrosive the testing interval may be significantly reduced. Typically, functional testing is recommended every six months but should at least be annually.
  • What is the legislation for fire alarm testing in the UK?
    In the UK, fire alarm testing is governed by various regulations, including the Regulatory Reform (Fire Safety) Order 2005 and British Standard BS 5839. These standards mandate regular testing and maintenance of fire alarm systems to ensure compliance and enhance fire safety measures.
  • Is weekly fire alarm testing a legal requirement in the UK?
    Yes, weekly fire alarm testing is a legal requirement in the UK under the Regulatory Reform (Fire Safety) Order 2005. This requires weekly testing of fire alarms in commercial premises, the tests should adhere to guidelines set out in BS5839.
  • How do you use a Solo smoke detector tester?
    With the Solo smoke aerosol installed in the dispenser (Solo 330) raise the tester so the detector sits within the test cup, press up against the ceiling for a max of 1 second to release the smoke stimulus, wait for detector to activate and verify the detector response. 
Visitors: 12,947,471